The grandson of my neighbor had an old Remington 550-1 that is old enough to not have a serial number, so it's pre-68. It hadn't been look at or cleaned in years so I took it and stripped it, after ordering the manual from Remington of course. All went well and we were supposed to shoot this week so I took it out and did a general ops check/inspection. I'm glad I did, I saw something I didn't catch during the cleaning, what looks like a crack in the barrel. I'm not going to let anyone shoot it, and as soon as I see his dad I'll explain why.
Here's a pic of it
http://i7.photobucket.com/albums/y271/c ... C_0009.jpg
A lesson in rifle inspection
- cageym
- Posts: 405
- Joined: Thu Aug 21, 2008 3:45 am
A lesson in rifle inspection
RESISTANCE IS NOT FUTILE. It's voltage divided by current.
There is no such thing as overkill. There is only "Open fire!" and "Reloading!"
-John Ringo "The Hot Gate"
There is no such thing as overkill. There is only "Open fire!" and "Reloading!"
-John Ringo "The Hot Gate"
- Denis
- Posts: 6570
- Joined: Fri Aug 22, 2008 5:29 am
Re: A lesson in rifle inspection
My goodness! Well spotted. That might have been nasty.
- Candyman
- Posts: 864
- Joined: Wed Sep 10, 2008 1:29 am
Re: A lesson in rifle inspection
This could have been caused by obstruction in the barrel and the gun being fired or from oil in the barrel. Most of the time when a rifle is fired with oil in the barrel it will only leave an oil ring. What this is, is a ring cut unto the bore where the bullet has pushed the oil and skiped over it. If you use a bore light and see a small dark ring in the bore, then it is most likely an oil ring.
But if it was an obstruction in the bore, a bulge can happen at the barrels weakest point behind the obstruction.
You may be anle to order a barrel from Numrich gun parts and repair the rifle.
Edit: They have 5 in stock and the price is under $50. http://www.e-gunparts.com/product.asp?c ... SKU=743790
But if it was an obstruction in the bore, a bulge can happen at the barrels weakest point behind the obstruction.
You may be anle to order a barrel from Numrich gun parts and repair the rifle.
Edit: They have 5 in stock and the price is under $50. http://www.e-gunparts.com/product.asp?c ... SKU=743790
Do not relish to feel what the men that used these weapons felt when they saw the elephant. For the elephant has tusk and to see him is to have his tusk dig deep into your soul. You will always have a part of you that will be cold and empty.
- 1911Man
- Posts: 469
- Joined: Tue Aug 19, 2008 12:27 pm
- martini
- Posts: 554
- Joined: Mon Aug 18, 2008 10:12 pm
Re: A lesson in rifle inspection
wow, that could have really sucked. How often does damage like this happen on modern weapons?
Justice Sotomayor, States may have grown accustomed to violating the rights of American citizens, but that does not bootstrap those violations into something that is constitutional. — Alan Gura
- Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: A lesson in rifle inspection
Ever consider a career in aircraft maintenance? 8^)
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
- workinwifdakids
- Posts: 3594
- Joined: Tue Aug 19, 2008 3:57 am
Re: A lesson in rifle inspection

You do know you may have saved someone's life, right?
And may I say, from a moral point of view, I think there can be no justification for shoving snack cakes up your action.
--Weetabix
--Weetabix
- mekender
- Posts: 13189
- Joined: Tue Aug 19, 2008 9:31 pm
Re: A lesson in rifle inspection
not too sure that a .22 would be fatal if it were shot in that condition, probably wouldnt even have a problem with it and at worst would get a small gas vent out of the crack.
not safe, but it would surprise me if it were fatal.
not safe, but it would surprise me if it were fatal.
“I no longer need to run as a Presidential Candidate for the Socialist Party. The Democrat Party has adopted our platform.” - Norman Thomas, a six time candidate for president for the Socialist Party, 1944
- Mud_Dog
- Posts: 1223
- Joined: Tue Aug 19, 2008 1:21 am
Re: A lesson in rifle inspection
Don't underestimate the little .22LR, they generate more pressure in that tiny barrel than a 10 gauge shotgun. There's a reason those barrels are much thicker than shotguns. Death, maybe not, but loss of fingers or a hand is no small deal.mekender wrote:not too sure that a .22 would be fatal if it were shot in that condition, probably wouldnt even have a problem with it and at worst would get a small gas vent out of the crack.
not safe, but it would surprise me if it were fatal.
Obamalypse, Part II: The Armening. (-NPR)
- mekender
- Posts: 13189
- Joined: Tue Aug 19, 2008 9:31 pm
Re: A lesson in rifle inspection
the crack is down by the handguard in front of the sight so i could easily see hand damage comming from that... i wouldnt shoot itMud_Dog wrote:Don't underestimate the little .22LR, they generate more pressure in that tiny barrel than a 10 gauge shotgun. There's a reason those barrels are much thicker than shotguns. Death, maybe not, but loss of fingers or a hand is no small deal.mekender wrote:not too sure that a .22 would be fatal if it were shot in that condition, probably wouldnt even have a problem with it and at worst would get a small gas vent out of the crack.
not safe, but it would surprise me if it were fatal.
“I no longer need to run as a Presidential Candidate for the Socialist Party. The Democrat Party has adopted our platform.” - Norman Thomas, a six time candidate for president for the Socialist Party, 1944