steel wool vs. dryer lint for firestarter?

The place for general talk about gun, shooting, loading, camping, survival, and preparedness related tools and gear, as well as gear technology discussion, gear reviews, and gear specific "range reports" (all other types of gear should be on the back porch).
Post Reply
User avatar
workinwifdakids
Posts: 3594
Joined: Tue Aug 19, 2008 3:57 am

steel wool vs. dryer lint for firestarter?

Post by workinwifdakids »

What are your thoughts on steel wool vs. dryer lint for a survival firestarting material? Do you see pro v con in either?
And may I say, from a moral point of view, I think there can be no justification for shoving snack cakes up your action.
--Weetabix
Top
User avatar
Rod
Posts: 4824
Joined: Fri Aug 15, 2008 1:08 pm

Re: steel wool vs. dryer lint for firestarter?

Post by Rod »

I'd probably go with steel wool, it's possible to get it wet and still use it. Lint will just turn into a soggy mess.
one can be a Democrat, or one can choose to be an American.
Good acting requires an imagination; reality requires a person not getting lost in their imagination.
"It's better to have a gun if you need it". Felix's opthamologist
Top
User avatar
First Shirt
Posts: 4378
Joined: Mon Aug 18, 2008 11:32 pm

Re: steel wool vs. dryer lint for firestarter?

Post by First Shirt »

I make firestarters from paper egg cartons, filling the pockets with dryer lint, sticking a strike-anywhere match in the center, and pouring melted canning wax over the whole mess. Will start a fire just about anywhere.
But there ain't many troubles that a man caint fix, with seven hundred dollars and a thirty ought six."
Lindy Cooper Wisdom
Top
User avatar
mekender
Posts: 13189
Joined: Tue Aug 19, 2008 9:31 pm

Re: steel wool vs. dryer lint for firestarter?

Post by mekender »

we just used to soak cotton balls in bug spray when we were out camping... worked quite nicely, even when wet
“I no longer need to run as a Presidential Candidate for the Socialist Party. The Democrat Party has adopted our platform.” - Norman Thomas, a six time candidate for president for the Socialist Party, 1944
Top
Fivetoes
Posts: 1466
Joined: Mon Aug 18, 2008 10:21 pm

Re: steel wool vs. dryer lint for firestarter?

Post by Fivetoes »

Steel wool will light up with a flashlight battery.
Top
User avatar
Bullspit
Posts: 712
Joined: Mon Aug 18, 2008 9:48 pm

Re: steel wool vs. dryer lint for firestarter?

Post by Bullspit »

I like cotton balls soaked in Vaseline. Easy to catch with a fire steel and works great as tinder for flint and steel.
"Stand it like a man, and give some back." Al Swearengen
Top
User avatar
blackeagle603
Posts: 9783
Joined: Tue Aug 19, 2008 4:13 am

Re: steel wool vs. dryer lint for firestarter?

Post by blackeagle603 »

As my NACCS land survival instructor pointed out one very cold February morning at Eglin, "That's what belly buttons are for. I never clean mine out." Then proceeded to start a fire with the lint he pulled out.
"The Guncounter: More fun than a barrel of tattooed knife-fighting chain-smoking monkey butlers with drinking problems and excessive gambling debts!"

"The right of the citizens to keep and bear arms has justly been considered, as the palladium of the liberties of a republic;" Justice Story
Top
User avatar
Weetabix
Posts: 6113
Joined: Fri Aug 15, 2008 11:04 pm

Re: steel wool vs. dryer lint for firestarter?

Post by Weetabix »

Can't say about the belly button lint, but I've had indifferent luck with dryer lint. Someone told me that it was because my wife uses dryer sheets - something in it makes the lint flame-retardant. I guess that makes sense. I think vent fires used to be a problem. And I know that when my kids were babies all the baby-jammies were flame retardant. I could never light a fire with a baby who was ready for bed. :shock:
Note to self: start reading sig lines. They're actually quite amusing. :D
Top
Greg
Posts: 8486
Joined: Tue Aug 19, 2008 2:15 pm

Re: steel wool vs. dryer lint for firestarter?

Post by Greg »

I make fire-starters out of dryer lint, as dryer lint is plentiful and free. (I don't *use* too many of them, but it's fun.) My recipe involves dryer lint and melted candles (gotten for free) cast together in small molds. Makes little firepucks. Use too little wax and they're vulnerable to getting wet- too much and they're hard to light.

One thing to be aware of is that you should only do this if your dryer lint is all cotton. Burning synthetic fibers is a bad idea.
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby

If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
Top
The Quiet Man

Re: steel wool vs. dryer lint for firestarter?

Post by The Quiet Man »

Greg wrote:I make fire-starters out of dryer lint, as dryer lint is plentiful and free. (I don't *use* too many of them, but it's fun.) My recipe involves dryer lint and melted candles (gotten for free) cast together in small molds. Makes little firepucks. Use too little wax and they're vulnerable to getting wet- too much and they're hard to light.

One thing to be aware of is that you should only do this if your dryer lint is all cotton. Burning synthetic fibers is a bad idea.
:lol: Go ahead...tell me it causes global warming! OK...how about the erosion of the ozone layer? Swine flu? Herpes? Acne? :lol:
Top
Post Reply

Return to “Gear Talk and Tech”