Page 1 of 2
Pattern Estimating Shotgun Laser?
Posted: Mon Mar 16, 2009 5:58 pm
by Durham68
Does anyone know if there is a laser built for tactical or HD shotguns that projects the estimated pattern onto the target? Maybe a large center dot with a ring of smaller dots angled slightly out to project a larger pattern the further out the target. Or a single bright center dot with a dimmer, yet visible, ring around it (again increasing in size as distance from the target increases).
Re: Pattern Estimating Shotgun Laser?
Posted: Mon Mar 16, 2009 6:30 pm
by Netpackrat
It's called a flashlight.
Re: Pattern Estimating Shotgun Laser?
Posted: Mon Mar 16, 2009 6:51 pm
by Durham68
I know, I know. I was thinking something that could either be used in addition to a flashlight that had a wider beam... or if used without a flashlight, it wouldn't foul up one's night vision.
Is it that lame of an idea? Too mall ninja for you NPR?
Re: Pattern Estimating Shotgun Laser?
Posted: Mon Mar 16, 2009 8:01 pm
by Netpackrat
Durham68 wrote:Too mall ninja for you NPR?
Don't forget you are talking to the guy with a tactical light on his lever action...
Re: Pattern Estimating Shotgun Laser?
Posted: Mon Mar 16, 2009 8:21 pm
by Durham68
Netpackrat wrote:Durham68 wrote:Too mall ninja for you NPR?
Don't forget you are talking to the guy with a tactical light on his lever action...
Still looking. Closest I can find is
this.
Re: Pattern Estimating Shotgun Laser?
Posted: Tue Mar 17, 2009 2:00 am
by Netpackrat
I don't care for their acronym. When you find what you are looking for, you should call it the Shotgun Mounted Illuminated Lethality Estimator, or SMILE (wait for flash).....
Re: Pattern Estimating Shotgun Laser?
Posted: Thu Mar 19, 2009 3:46 pm
by Durham68
I don't care for their acronym. When you find what you are looking for, you should call it the Shotgun Mounted Illuminated Lethality Estimator, or SMILE (wait for flash).....
I ran that one past my father in law who likes guns and loves word play. He thought it was excellent.
I haven't found one yet. Any ideas on how to put one together DIY?
Re: Pattern Estimating Shotgun Laser?
Posted: Fri Mar 20, 2009 12:40 am
by Combat Controller
Laser pointers taped together and jammed in the bore? Or, small laser pointers inserted into a spent shell?
Re: Pattern Estimating Shotgun Laser?
Posted: Fri Mar 20, 2009 3:15 am
by Durham68
CombatController wrote:Or, small laser pointers inserted into a spent shell?
A bunch of laser pointer rigged up with some way to adjust the spread would work... but I was thinking of an actual continuous ring. Like the Sur-c I linked to above, but with a brightly defined ring around the outside that is adjustable for spread.
Seems simple enough to do with two or three lasers and a lens or two. But I don't know the first thing about optics.
Re: Pattern Estimating Shotgun Laser?
Posted: Fri Mar 20, 2009 3:18 am
by Netpackrat
Flashlight with a red filter lens. 8^)