I am in the process of doing a complete build(and I do mean complete) of a Mauser 71/84 and when the parts arrive a 88 commission rifle.
I am looking for load data for either or both.
I havent done anything like this in many years so I'm a little out of date.
Any help anyone has will be appreciated.
survivalists Dad
load info
-
- Posts: 1466
- Joined: Mon Aug 18, 2008 10:21 pm
Re: load info
The 71/84 would be a case full of 2 or 3f black powder. Make sure there is no air gap. There probably are smokeless loads using pistol powder, but I am not that familiar with.
The 88 would use smokeless.
The 88 would use smokeless.
- Whirlibird
- Posts: 1181
- Joined: Tue Aug 19, 2008 11:58 pm
Re: load info
8x57 converted commission rifle .323
8x57 .318 bore
If you want to keep pressures down check out IMR's Trail Boss. You may have to extrapolate the loads but the powder's low pressure enough to do so easily.
71/84
8x57 .318 bore
If you want to keep pressures down check out IMR's Trail Boss. You may have to extrapolate the loads but the powder's low pressure enough to do so easily.
71/84