DIY barrel rifling.
-
Cybrludite
- Posts: 5048
- Joined: Fri Aug 15, 2008 9:13 am
DIY barrel rifling.
EDM makes it doable on the cheap. Another nail in the coffin of effective gun control.
"If it ain't the Devil's Music, you ain't doin' it right." - Chris Thomas King
"When liberal democracies collapse, someone comes along who promises to make the trains run on time if we load the right people into them." - Tam K.
"When liberal democracies collapse, someone comes along who promises to make the trains run on time if we load the right people into them." - Tam K.
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: DIY barrel rifling.
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
-
HTRN
- Posts: 12403
- Joined: Wed Aug 20, 2008 3:05 am
Re: DIY barrel rifling.
With a lathe, you can gun drill a rifle barrel, then pull a button thru it...
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: DIY barrel rifling.
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
-
HTRN
- Posts: 12403
- Joined: Wed Aug 20, 2008 3:05 am
Re: DIY barrel rifling.
Amazon even sells buttons these days.
<Edit> I still don't think it's worth the headache unless you plan to make significant quantities - between Redman and TJ, you've got pretty much every pistol barrel size available.
<Edit> I still don't think it's worth the headache unless you plan to make significant quantities - between Redman and TJ, you've got pretty much every pistol barrel size available.
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: DIY barrel rifling.
No but I might buy a button and try to make one for shits and grins. If I don’t mess up too bad on the die filer build I will have some extra 4140 left over.
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
-
Precision
- Posts: 5273
- Joined: Wed Aug 20, 2008 6:01 pm
Re: DIY barrel rifling.
does making your own rifled barrel run afoul of any laws, yet?
"Those who hammer their guns into plows will plow for those who do not." ~Thomas Jefferson
My little part of the blogosphere. http://blogletitburn.wordpress.com/
My little part of the blogosphere. http://blogletitburn.wordpress.com/
-
Cybrludite
- Posts: 5048
- Joined: Fri Aug 15, 2008 9:13 am
Re: DIY barrel rifling.
As long as they are allowed to sell them.
"If it ain't the Devil's Music, you ain't doin' it right." - Chris Thomas King
"When liberal democracies collapse, someone comes along who promises to make the trains run on time if we load the right people into them." - Tam K.
"When liberal democracies collapse, someone comes along who promises to make the trains run on time if we load the right people into them." - Tam K.
-
SoupOrMan
- Posts: 5696
- Joined: Tue Aug 19, 2008 2:58 am
Re: DIY barrel rifling.
So... a bench vise, a drill press, angle grinder, button, some files and some kind of hydraulic arbor press?
I do have some extra bench space between my vise and my reloading press... I could probably get Khyber Pass - level stuff on the second try.
I do have some extra bench space between my vise and my reloading press... I could probably get Khyber Pass - level stuff on the second try.
Remember, folks, you can't spell "douche" without "Che."
“PET PARENTS?” You’re not a “pet parent.” You’re a pet owner. Unless you’ve committed an unnatural act that succeeded in spite of biology. - Glenn Reynolds
“PET PARENTS?” You’re not a “pet parent.” You’re a pet owner. Unless you’ve committed an unnatural act that succeeded in spite of biology. - Glenn Reynolds
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: DIY barrel rifling.
I found there are actually a lot of rifling buttons available from a seller on Ebay, made in eastern Europe. Long delivery times, but I think they are the same ones as Mark Serbu used in his video.
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop