HTRN, if you go for one of the huge printers, you may need this:
https://www.printables.com/model/648518 ... -and-akro-
I am not even sure where I would put something like the Orangestorm Giga. Haven't even come close to using the full volume of my Voron yet, although I did just about max out the build plate once.
3d Uber-Printer Build (Voron 2.4)
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: 3d Uber-Printer Build (Voron 2.4)
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
-
HTRN
- Posts: 12403
- Joined: Wed Aug 20, 2008 3:05 am
Re: 3d Uber-Printer Build (Voron 2.4)
I kinda want a big printer, so I can print large hex terrain for Battletech. The idea being, if I'm gonna drop that kind of coin for a Bambu, I might as well move up to the giga for a bit more money.
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: 3d Uber-Printer Build (Voron 2.4)
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
-
Netpackrat
- Posts: 14002
- Joined: Fri Aug 15, 2008 11:04 pm
Re: 3d Uber-Printer Build (Voron 2.4)
Cognosce teipsum et disce pati
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
"People come and go in our lives, especially the online ones. Some leave a fond memory, and some a bad taste." -Aesop
-
HTRN
- Posts: 12403
- Joined: Wed Aug 20, 2008 3:05 am
Re: 3d Uber-Printer Build (Voron 2.4)
What caught my eye was the dual independent print heads, perfect for having a second print head loaded with water soluble filament for supports.Netpackrat wrote: ↑Sat Dec 09, 2023 10:02 pm Voron Phoenix; IDEX with 600x600 build plate.
https://www.youtube.com/watch?v=YZT4w_VACdI
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt