PSA had a sale on brass earlier in the month (I think it may still be going) and I'm here to tell you: This once fired, uncleaned brass is about the dirtiest, nastiest, funkiest shite I've ever seen picked up from a range. If I was forced to guess they either bought a few pallets of .mil brass cleaned up from a range from DRMO, or they are knee deep in brass at their ranges until they do a cleanup. I mean there's dirt and vegetation mixed in.
In the past I'd usually "pickeled" my brass with a mix of vinegar, hot water, Dawn, and salt. I got decent results if it wasn't too dirty to start with.
This week I ordered one of these. A big selling point was the wet cleaning system using a mix of stainless pins and liquid cleaners. By most accounts some Dawn with a hint of Lemi Shine does a right, bang up job. Another nice point is the pins are supposed to do a thorough job of cleaning primer pockets and the inside of the case. Cases should look new coming out. I expect I'll be doing 500-600 .308 cases this weekend. I'll post some before and afters.
Frankford Rotary Tumbler
- First Shirt
- Posts: 4378
- Joined: Mon Aug 18, 2008 11:32 pm
Re: Frankford Rotary Tumbler
Yes, please do! I've been debating this, and was waiting for a [strike]sucker[/strike] [strike]pigeon[/strike] [strike]guinea pig[/strike] volunteer to try it first. Thanks!
there's one born every minute
there's one born every minute
But there ain't many troubles that a man caint fix, with seven hundred dollars and a thirty ought six."
Lindy Cooper Wisdom
Lindy Cooper Wisdom
- Steamforger
- Posts: 2785
- Joined: Mon Aug 18, 2008 5:41 pm
Re: Frankford Rotary Tumbler
I CAN TELL YOU IT IS VERY, VERY NOISY!!!!
- First Shirt
- Posts: 4378
- Joined: Mon Aug 18, 2008 11:32 pm
Re: Frankford Rotary Tumbler
THANKS, I'D KINDA FIGURED THAT, BUT IT'S NICE TO HAVE IT CONFIRMED. IS IT FASTER THAN VIBRATORY TUMBLERS?
But there ain't many troubles that a man caint fix, with seven hundred dollars and a thirty ought six."
Lindy Cooper Wisdom
Lindy Cooper Wisdom
- HTRN
- Posts: 12401
- Joined: Wed Aug 20, 2008 3:05 am
Re: Frankford Rotary Tumbler
Generally no. But you can't use the vibatories with stainless media.
Also, you make really big ones out of those plastic cement mixers.
Also, you make really big ones out of those plastic cement mixers.
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
- First Shirt
- Posts: 4378
- Joined: Mon Aug 18, 2008 11:32 pm
Re: Frankford Rotary Tumbler
I know a guy who made his out of a home treadmill and some 5-gallon plastic water jugs. Wasn't entirely sure I believed his sales pitch, though, so thought I'd wait for more trusted confirmation.
But there ain't many troubles that a man caint fix, with seven hundred dollars and a thirty ought six."
Lindy Cooper Wisdom
Lindy Cooper Wisdom
- Steamforger
- Posts: 2785
- Joined: Mon Aug 18, 2008 5:41 pm
Re: Frankford Rotary Tumbler
I'll post some pics shortly.
ETA- I'm glad I got it. It did a much better job than anything I've used so far, but it does need some time to get that "cleaner than new" finish.It's a bit louder than I'd like being an apartment dweller and all, but I'll either take it to work or do it during more appropriate times of the day.
ETA- I'm glad I got it. It did a much better job than anything I've used so far, but it does need some time to get that "cleaner than new" finish.It's a bit louder than I'd like being an apartment dweller and all, but I'll either take it to work or do it during more appropriate times of the day.
- blackeagle603
- Posts: 9774
- Joined: Tue Aug 19, 2008 4:13 am
Re: Frankford Rotary Tumbler
I got some stainless media to polish a sawed off 105 casing. A retired Marine buddy was about the business of making a beer stein out of it. I ran it in my cement mixer. Put it in a 1 gallon paint pail and packed that in a 5 gallon bucket that I wedged in the mixer.
Building a rotary tumbler is on my project bucket list. Maybe if we had longer winters here in SoCal I'd get more of those hobby type projects done and get a respite from the outside landscape, fencing and paving projects.
Building a rotary tumbler is on my project bucket list. Maybe if we had longer winters here in SoCal I'd get more of those hobby type projects done and get a respite from the outside landscape, fencing and paving projects.
"The Guncounter: More fun than a barrel of tattooed knife-fighting chain-smoking monkey butlers with drinking problems and excessive gambling debts!"
"The right of the citizens to keep and bear arms has justly been considered, as the palladium of the liberties of a republic;" Justice Story
"The right of the citizens to keep and bear arms has justly been considered, as the palladium of the liberties of a republic;" Justice Story
- McClarkus
- Posts: 802
- Joined: Tue May 12, 2009 10:50 pm
Re: Frankford Rotary Tumbler
Hmm you gave me room for thought. I have a 5 gallon paint mixer that is of the angled rotary type.
One secret to life. Step #1 - Find something you enjoy doing. Step #2 - Find someone foolish enough to pay you to do it.
- Steamforger
- Posts: 2785
- Joined: Mon Aug 18, 2008 5:41 pm
Re: Frankford Rotary Tumbler
Update:
I did a 90 minute roll this afternoon. Results were excellent. Very happy.
I did a 90 minute roll this afternoon. Results were excellent. Very happy.