Page 6 of 10

Re: 585 HE -- Cases In Production --

Posted: Sun Dec 27, 2015 12:12 am
by HTRN
I'm kinda surprised at the use of the Lawton action, as that more aimed at precision shooting than for use with thumpers. I would think the Montana 1999 safari action would be the preferable choice.

Re: 585 HE -- Cases In Production --

Posted: Sun Dec 27, 2015 5:13 am
by SoupOrMan
You're not going to take down the Death Star without precise and accurate fire, HTRN. Thus a precision action.

Re: 585 HE -- Cases In Production --

Posted: Sat Jan 02, 2016 10:54 am
by hubel585
Yes the Montana PH is great too, Been 4 585HEs done in them,

We just mention the Lawtons and Stillers as there are quit a few out there

at decent prices, like the PH price is decent priced, And Lawton and Stiller

Cheytac actions are long, big, and strong. Been 4 done on Ruger #1s some on 77s

About 8-10 on Enfields. I really like enfields We promote them all,

to get as may 585s in guys hands as possible.And affordable. Ed

Re: 585 HE -- Cases In Production --

Posted: Sun Jan 24, 2016 9:44 pm
by hubel585
A poster reading our threads said '' I'm slowly becoming a recoilapheliac''..
That is neat term , and very glad that folks are catching the big bore fever.

Here is a simple, yet neat peep sight we can use on the rear sporterized
bridges of Enfields, works on other rear bridges also.Including shotguns.
I like peep sights the best for most shooting. They also come with flat
bottoms also for bridges and receivers that are flat on top.

Image

Another picture of the 585 HE one of our guys put in the MPI stock..

Image

Here is another pic of our guys 24ga FH in the NEF

Image


On straight sided cases like our 585 HE the die set has a mouth expander
die to make it easy to insert bullets. The die flares the mouth, but I always
felt that doing what is really a relative relatively sharp flare, and then the slight
roll crimping the same area of the case into a groove on the
bullet or slug, shortens case life.

So I just use expander plug out of the die, by hand, using just the bottom of
of the expander plug and just push it in a little, wobble it around a small
amount, bullet goes in ok, case mouths last longer, good for dozens of loads,
with moderate hunting and target loads.Only takes a few seconds and less
work that has to be done in the press ... Ed

Image

Re: 585 HE -- Cases In Production --

Posted: Sat Feb 13, 2016 6:35 am
by hubel585
Here is video by Corlanes Sporting, Dawson Creek, BC, CAN.
Known as Rocky Mtn Rifle. Video is on Youtube of testing our
585 HE in a barreled action, they are building for a guy. They are
shooting it into their big bullet trap with test load..

https://www.youtube.com/watch?v=1vzQjRGfT1A

Allan and Grant Swan in Australia are building 585HE for a guy,
the second one they built. First one killed the buff pictured earlier .
AHR and Vestals will make folks here in US a 585 HE.
Here is another view of a Lawton action big enough for 585HE..

Image

Picture of Rossi singleshot with 585 barrel mono-blocked into it,
chambered for our 585 BB 2.17" case, for testing in a light rifle
with just pistol grip to simulate the case in pistols. Others going to
put case in leverguns, autoloaders. We got lots of cases. Ed

Image

Re: 585 HE -- Cases In Production --

Posted: Fri Mar 18, 2016 2:33 am
by hubel585
The style of most break actions singles aren't the greatest, that we
we used for 12ga FH, 10ga FH, other caliber barrels we mono-blocked
in them like .585" bore for 585HE and 24ga FH.. One that is close
that we have, is the Magtech.

Well the guys have found one that is super strong lockup and looks
real nice. And has the good quality look. It comes 12ga light shot barrel,
soon be monoblocked to rifled 24ga FH, the little brother of the 585HE.

Told company if they did them NEFUltra style, rifled, heavy 12ga slug barrel,
for shotgun caliber only hunters, they couldn't make them fast enough.

Image


Here is picture of 585HE, In an Enfield that Bret and Darrel in Minn
set up with great camo finish, with nice brake job. It is in a Hogue, recoil
reducing, rubber coated, Compstock.Great job they did.. Ed

Image

Here is picture from the rear of the Enfield we mounted the short Weaver
rail piece on. It is mounted in the sight pocket that the actions have;
Can hold scope ring or a rear peep sight like UTG makes.. Ed

Image

Re: 585 HE -- Cases In Production --

Posted: Thu Apr 14, 2016 10:36 am
by hubel585
We will have arrived when we have this big bore in our back yard,
Kind of a neat suppressor,

Image


Here is folder shotgun, the guys set up as 24ga FH.
Shoots nice, looks nice, it a more expensive break action,
compared to many others.

Image


Here is another view of what we feel is a nearly perfect
break action. Guy is making a strong 24ga FH with it.

Image


Here is picture of a 585HE MRC PH a guy set up..

Image


Here is picture of our shorter 585 BB for leverguns, etc, with
variety of bullets..Can get energy like regular elephant guns..Ed

Image

Re: 585 HE -- Cases In Production --

Posted: Thu May 12, 2016 6:23 am
by hubel585
Here is a Midland break action a guy is doing in 24ga FH.

Image

Here is old catalog picture of different stuff used in old days
for shotgun loads. Some would be hairy in brass cases

Image

Here is picture of a MN a guy is doing 585HE in..
It is singleshot. Redid bolt handle, mounted it on the bolt
further back, so the port could be lengthened for our long case.
Also puts handle back where it is easier to grab.
Needs, more shaping, polishing, blueing, scope rail added.

Image

Here is another picture of the 585HE with great looking stock.
Nice looking wood. Ed

Image

Re: 585 HE -- Cases In Production --

Posted: Sun Jun 19, 2016 4:21 am
by hubel585
There are guys on Castboolits forum experimenting with
locking on plastic bases securely on slugs.
Making their own front heavy ones for smoothbores.

Here is picture of our 585BB case next to long 585HE.

Image


Here is another view of the great camo job on the
585HE Enfield, a top view. Ed

Image

Re: 585 HE -- Cases In Production --

Posted: Sun Jun 19, 2016 5:17 am
by Netpackrat
But will it shoot all the way through a gay night club?