Adding a reloading press to a new workbench
- SoupOrMan
- Posts: 5686
- Joined: Tue Aug 19, 2008 2:58 am
Re: Adding a reloading press to a new workbench
And in theory I can undo the bolts, break it down for moving and reassemble it in a new workspace in an hour's time or so by myself. That solves some of the problems of getting it through doorways.
Remember, folks, you can't spell "douche" without "Che."
“PET PARENTS?” You’re not a “pet parent.” You’re a pet owner. Unless you’ve committed an unnatural act that succeeded in spite of biology. - Glenn Reynolds
“PET PARENTS?” You’re not a “pet parent.” You’re a pet owner. Unless you’ve committed an unnatural act that succeeded in spite of biology. - Glenn Reynolds
-
- Posts: 1698
- Joined: Fri Jun 20, 2014 11:14 pm
Re: Adding a reloading press to a new workbench
A) Old bowling alley is a good rigid surface for workbench.
B ) at least for a weightlifting platform, put on three layers of 1 inch plywood alternating the grain direction between layers, and gluing and screwing them together.
B ) at least for a weightlifting platform, put on three layers of 1 inch plywood alternating the grain direction between layers, and gluing and screwing them together.
- randy
- Posts: 8334
- Joined: Wed Aug 13, 2008 11:33 pm
- Location: EM79VQ
Re: Adding a reloading press to a new workbench
I lucked out when I built my workbench. The HQ building I worked in at the time was replacing all of the solid wood doors for the secure offices. My NCOIC and I snagged two of them on the way to the scrap dumpster and one of them is my bench top.
Been shipped all over the country and has supported reloading, gunsmithing/cleaning, electronics projects, model building and assorted odd jobs.
Nice one Soup
Been shipped all over the country and has supported reloading, gunsmithing/cleaning, electronics projects, model building and assorted odd jobs.
Nice one Soup
...even before I read MHI, my response to seeing a poster for the stars of the latest Twilight movies was "I see 2 targets and a collaborator".
-
- Posts: 8486
- Joined: Tue Aug 19, 2008 2:15 pm
Re: Adding a reloading press to a new workbench
That might be a great deal cheaper than trying to get a large butcherblock work surface.BDK wrote:A) Old bowling alley is a good rigid surface for workbench.
B ) at least for a weightlifting platform, put on three layers of 1 inch plywood alternating the grain direction between layers, and gluing and screwing them together.
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby
If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
-
- Posts: 1698
- Joined: Fri Jun 20, 2014 11:14 pm
Re: Adding a reloading press to a new workbench
No idea about machine use, but put it on top of 2x6's on 4" centers, and it won't wiggle when carrying/jumping/lifting large weights on it.
Bowling alley is, of course, quite cheap but harder to get on a regular basis.
Bowling alley is, of course, quite cheap but harder to get on a regular basis.
-
- Posts: 1698
- Joined: Fri Jun 20, 2014 11:14 pm
Re: Adding a reloading press to a new workbench
I will say that my home platform, built by a childhood friend and carpenter, which was framed with 2x8's, and backed with 1" plywood sheet, felt more solid that the usual competition platforms which were just the glued and screwed plywood in a metal frame.
But, that might have been more about the wiggle inherent to the metal
But, that might have been more about the wiggle inherent to the metal
- HTRN
- Posts: 12399
- Joined: Wed Aug 20, 2008 3:05 am
Re: Adding a reloading press to a new workbench
Ikea.Greg wrote:That might be a great deal cheaper than trying to get a large butcherblock work surface.
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
-
- Posts: 8486
- Joined: Tue Aug 19, 2008 2:15 pm
Re: Adding a reloading press to a new workbench
That had not occurred to me.HTRN wrote:Ikea.Greg wrote:That might be a great deal cheaper than trying to get a large butcherblock work surface.
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby
If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
- HTRN
- Posts: 12399
- Joined: Wed Aug 20, 2008 3:05 am
Re: Adding a reloading press to a new workbench
Ikea sells butcher block counter tops relatively reasonably priced. Another option is Grizzly industrial, but that can run into some real money..
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
-
- Posts: 1517
- Joined: Mon Aug 18, 2008 6:23 pm
Re: Adding a reloading press to a new workbench
Bally Block "wood welded" tops are pretty fantastic. I have no clue on price though. We've got a few benches at work that have been there for years getting abused with that stuff for the top. Look ugly as sin now, but still solid as can be. Most of the new benches we've been building have UHMW surfaces. I kinda like it, I might end up with a new bench in the garage with it.