Chinese Premier Upset over balls and sockets

Discussion of all things technological and/or gadgety
Post Reply
toad
Posts: 2516
Joined: Wed Aug 20, 2008 5:00 pm

Chinese Premier Upset over balls and sockets

Post by toad » Fri Jan 29, 2016 4:39 pm

It seems he has found out that China doesn't have any company that can make the balls for a ball point pen. I did a little looking and the ball not only has to be precise and hard but they also require a texture to help hold the ink. Apparently it was cheaper for Chinese manufacturers to just buy balls and sockets then do the assembly work. The materials used seem to be tungsten carbide, steel, and for throw a way's, some use brass.

User avatar
evan price
Posts: 1799
Joined: Tue Aug 19, 2008 10:24 am

Re: Chinese Premier Upset over balls and sockets

Post by evan price » Fri Jan 29, 2016 7:14 pm

https://m.youtube.com/watch?v=ElX4PUUsja0
Speaking of Chinese balls & sockets...
Sic gorgiamus allos subjectatos nunc

http://ohioccwforums.org/
Ohioans for Concealed Carry:THE source for Ohio CCW information and discussion!

Langenator
Posts: 881
Joined: Sun Jun 27, 2010 2:10 pm

Re: Chinese Premier Upset over balls and sockets

Post by Langenator » Fri Jan 29, 2016 9:34 pm

Reminds me a bit of how the Soviets copied the B-29 from some that were interned during WWII.

Their sheet metal industry apparently couldn't roll sheet aluminum as thin as their American counterparts, so they built the planes out of thicker metal and beveled the edges to make things fit. The performance of the Soviet copy was notably reduced versus the American due to the extra weight.
Fortuna Fortis Paratus

User avatar
slowpoke
Posts: 1223
Joined: Sat Aug 23, 2008 4:09 pm

Re: Chinese Premier Upset over balls and sockets

Post by slowpoke » Sat Jan 30, 2016 1:06 am

Langenator wrote:Reminds me a bit of how the Soviets copied the B-29 from some that were interned during WWII.

Their sheet metal industry apparently couldn't roll sheet aluminum as thin as their American counterparts, so they built the planes out of thicker metal and beveled the edges to make things fit. The performance of the Soviet copy was notably reduced versus the American due to the extra weight.
Wasn't that they couldn't make it as thin, it was US was made in fractional inch thickness and Soviets used Millimeter based. So they could go to thin or too thick. The engineers tried to re-engineer it for their industry, and Stalin sent them to the Gulag for that since he wanted an exact copy. I like the leading edge bullet hole pre drilled though. :lol:
"Islam delenda est" Ass-op

Post Reply