Network cable color mapping

Discussion of all things technological and/or gadgety
Post Reply
Rich Jordan
Posts: 1840
Joined: Tue Aug 19, 2008 5:04 am

Network cable color mapping

Post by Rich Jordan »

Shot in the dark that someone here has had to do this.

We 'had' a standard that died:

Red: Firewall WAN connections (to modem/uplink/etc
Orange: Firewall DMZ connections (to switch with DMZ servers and devices
Standard Blue: Firewall LAN connections (to internal switches/devices)
Grey: Switch to patch for normal data connections (workstations, clients, printers)
Black: Switch to patch for VOIP data connections (or multi-VLAN, if VOIP VLAN was included cable was black)
Green: Inter-switch, inter-Rack

Pink: for prospective iSCSI or other restricted storage connections
Yellow: KVM (over Cat5)
iLO, iDRAC, and other 'sideline' management ports on servers got pale blue

Edited to add: another color (purple) for cables used to tie a high-availability firewall pair together using ports with dedicated configs.

On the device end, in-rack servers got white, and out on the floor, the clients used the same color as the patch (grey for desktops/printers, black for wired VOIP phones).

==

We're now supposed to decide on a standard to use both here and across customer sites that we are responsible for at the infrastructure level, and the examples I'm finding online are 'different' to put it mildly. All the cables connecting to the firewall are the same color (? found multiple like this...), VOIP and normal client lumped together as one color but PRINTERS get a different color; some use different color for patches connected to PoE capable switch ports instead of based on the type of client or VLANs or...

Some think our original was overcomplicated (may be it was) but I look at the 'standards' I find online and figure whats the point with so many uses overlapping ont he same color.

Anyone have an idea on best practices in this arena? We're not going to be doing very large environments; at most 3-4 racks with comm equipment/switches/servers/UPS. And we have to put in a cable order for our first recabling job pretty soon.

Thanks
Rich
User avatar
PawPaw
Posts: 4493
Joined: Fri Jan 02, 2009 8:19 pm

Re: Network cable color mapping

Post by PawPaw »

No replies today. I guess you're free to make the standard and publish it.
Dennis Dezendorf
PawPaw's House
rightisright
Posts: 4286
Joined: Mon Aug 18, 2008 9:41 pm

Re: Network cable color mapping

Post by rightisright »

I have trouble keeping electricians to use the same 4 wire colors...

Ok... not really problems with the electricians, but their helpers :)
User avatar
mekender
Posts: 13189
Joined: Tue Aug 19, 2008 9:31 pm

Re: Network cable color mapping

Post by mekender »

I don't know that there is a standard...

I don't really see much wrong with what you have posted so long as you can maintain it in the future. One note is that orange is typically used to denote fireproof/plenum so that might be one you change.
“I no longer need to run as a Presidential Candidate for the Socialist Party. The Democrat Party has adopted our platform.” - Norman Thomas, a six time candidate for president for the Socialist Party, 1944
Greg
Posts: 8486
Joined: Tue Aug 19, 2008 2:15 pm

Re: Network cable color mapping

Post by Greg »

There isn't a standard. But every place I've seen has their own conventions for what color gets used for what.

What's really fucked up is when a place *changes* conventions. And then only applies the new one going forwards. And then changes again... (Repeat 3 or 4 times.)
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby

If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
Greg
Posts: 8486
Joined: Tue Aug 19, 2008 2:15 pm

Re: Network cable color mapping

Post by Greg »

Rich Jordan wrote:Shot in the dark that someone here has had to do this.

We 'had' a standard that died:

Red: Firewall WAN connections (to modem/uplink/etc
Orange: Firewall DMZ connections (to switch with DMZ servers and devices
Standard Blue: Firewall LAN connections (to internal switches/devices)
Grey: Switch to patch for normal data connections (workstations, clients, printers)
Black: Switch to patch for VOIP data connections (or multi-VLAN, if VOIP VLAN was included cable was black)
Green: Inter-switch, inter-Rack

Pink: for prospective iSCSI or other restricted storage connections
Yellow: KVM (over Cat5)
iLO, iDRAC, and other 'sideline' management ports on servers got pale blue

Edited to add: another color (purple) for cables used to tie a high-availability firewall pair together using ports with dedicated configs.

On the device end, in-rack servers got white, and out on the floor, the clients used the same color as the patch (grey for desktops/printers, black for wired VOIP phones).

==

We're now supposed to decide on a standard to use both here and across customer sites that we are responsible for at the infrastructure level, and the examples I'm finding online are 'different' to put it mildly. All the cables connecting to the firewall are the same color (? found multiple like this...), VOIP and normal client lumped together as one color but PRINTERS get a different color; some use different color for patches connected to PoE capable switch ports instead of based on the type of client or VLANs or...

Some think our original was overcomplicated (may be it was) but I look at the 'standards' I find online and figure whats the point with so many uses overlapping ont he same color.

Anyone have an idea on best practices in this arena? We're not going to be doing very large environments; at most 3-4 racks with comm equipment/switches/servers/UPS. And we have to put in a cable order for our first recabling job pretty soon.

Thanks
Rich
You're not using enough fiber. :p
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby

If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr
Cobar
Posts: 1513
Joined: Mon Aug 18, 2008 6:23 pm

Re: Network cable color mapping

Post by Cobar »

Bah! Colors are for people that can see them. :x :lol:
User avatar
Cybrludite
Posts: 5048
Joined: Fri Aug 15, 2008 9:13 am

Re: Network cable color mapping

Post by Cybrludite »

Where I work it's yellow from the switch/router to the wall, gray inside the wall, and blue from the wall to the computer/printer/phone/network enabled medical device/etc. Pretty much if a user can see it, it's blue, if only we're supposed to see it, it's yellow, if no one but the roaches in the wall see it, it's gray.
"If it ain't the Devil's Music, you ain't doin' it right." - Chris Thomas King

"When liberal democracies collapse, someone comes along who promises to make the trains run on time if we load the right people into them." - Tam K.
Rich Jordan
Posts: 1840
Joined: Tue Aug 19, 2008 5:04 am

Re: Network cable color mapping

Post by Rich Jordan »

Cybrludite wrote:Where I work it's yellow from the switch/router to the wall, gray inside the wall, and blue from the wall to the computer/printer/phone/network enabled medical device/etc. Pretty much if a user can see it, it's blue, if only we're supposed to see it, it's yellow, if no one but the roaches in the wall see it, it's gray.
Thank; I know that won't work for us because we have a definite requirement to have the management network cables (in the rack), the WAN-side cables, and the DMZ cables being different color than the 'rest' of the cables. There is a WAN switch and a DMZ switch in place and they have similarly color coded and clearly marked labels on them to keep people from plugging the wrong things into them.

A couple of customer sites that have separate data and phone networks (all wired cat5 or 5e) also have color coded sockets on the patch panels and wallplates from when they used separate switches (because they couldn't do VLAN or QoS). Likely as the switching gets updated that color coding will be abandoned.
Post Reply